![]() ![]() ![]() Configuration Example:ĪSA(config)# snmp-server host inside 10.1.1. It is recommended to leave all traps enabled as the default setting. The default configuration has all snmp traps enabled ( snmp-server enable traps snmp authentication linkup linkdown coldstart). Other parameters, such as the interface name, security level, and IP address, should be configured on VLAN interfaces rather than on physical interfaces. Step4: Enable the ASA to send snmp traps to the NMSĪSA(config)# snmp-server enable traps ] By default, the ASA 5505 platform includes the interface vlan 1 and interface vlan 2 commands in its configuration. ![]() “community string” is like a preshared password which must be configured on both the ASA and the NMS in order for the two elements to communicate.ĪSA(config)# snmp-server community Where “interface name” is the ASA interface through which the NMS can be reached, and “ip address” is the NMS address. Step2: Identify the NMS host that can connect to the ASA for SNMP managementĪSA(config)# snmp-server host community
0 Comments
Leave a Reply. |